Floor fan VP-4E-500 with grille, metal body and metal stand. It is with blade diameter ф 500 mm, supply voltage 220VAC, rated power 420 W and flow rate 8850 m3/h.
- Fans and Blowers
- Industrial Fans
- Axial Fans And Blowers
- Fan, axial, ф500mm, 8850 M3 / H, 420W, VP-4E-500, 220VAC
Fan, axial, ф500mm, 8850 M3 / H, 420W, VP-4E-500, 220VAC
Axial fans are used when high flow rates are required. Low operational noise is an advantage when placed in ventilation shafts or ducts in industrial halls or public buildings. It is important, when choosing this type of fan, to take into account its characteristics so that they correspond to the particular application.
Industrial axial fan
- model - VP-4E-500 with blade;
- blade diameter - ф 500 mm;
- working modes - 2;
- stand - metal;
- operating voltage - 220 VAC (single phase);
- rated current - 2 A;
- rated power - 420 W;
- flow rate - 8850 m3/h;
- speed - 1400 rpm;
- number of poles - 4;
- bearing type - ball;
- operating temperature - from -5°C to +55°C;
- noise level - 89 dB;
- static pressure max - 190 Pa;
- body - metal.
The fan is not allowed to operate under vacuum conditions (for example, the blower can take air out of a room that can not get enough air otherwise). This will result in insufficient airflow to cool the motor and the fan will be damaged.
It is possible to adjust the fan speed by means of a frequency inverter or by phase adjustment with a reduction of the speed up to 75%. The fan can not be powered by a DC / AC inverter with a modified sinewave - this will cause it to malfunction.