Axial industrial fan PVO-S 300/4 with grid and square frame, propeller diameter Φ300 mm, supply voltage 230 VAC. Nominal power 60 W and flow rate 1600 m3 / h.
- Industrial Fans and Blowers
- Industrial Fans
- Axial Fans And Blowers
- Fan, Industrial, Axial, PVO-S 300/4, Ф300mm, 230VAC, 60W, 1600M3 / H
Fan, Industrial, Axial, PVO-S 300/4, Ф300mm, 230VAC, 60W, 1600M3 / H
Axial fans are used when high flow rates are required. Low operational noise is an advantage when placed in ventilation shafts or ducts in industrial halls or public buildings. It is important, when choosing this type of fan, to take into account its characteristics so that they correspond to the particular application.
Fan PVO-S 300/4
- propeller diameter - Ф300 mm;
- frame size - 400 x 400 mm;
- working voltage U - 230 VAC;
- rated current I - 0.45 A;
- power consumption - 60 W;
- flow rate - 1600 m3 / h;
- rotor frequency (rotation speed) - 1350 rpm (rpm);
- noise level - 70 dBA;
- protection level - IP54;
- joint type - bearing;
- housing - metal.
The fan is not allowed to operate under vacuum conditions (for example, the blower can take air out of a room that can not get enough air otherwise). This will result in insufficient airflow to cool the motor and the fan will be damaged.
It is possible to adjust the fan speed by means of a frequency inverter or by phase adjustment with a reduction of the speed up to 50%. The fan can not be powered by a DC / AC inverter with a modified sinewave - this will cause it to malfunction.