Digital clamp meter DCM4010FLEX from KPS, equipped with a flexible tip, designed for non-contact measurement of the value of alternating current with a range of up to 3000A.
Digital clamp meter with a flexible tip are designed for non-contact measurement of alternating current values during repair or construction of electrical installations. The instrument's large clearance of ф 100 mm is extremely convenient when measuring wires with a large cross-section or cable bundles.
1. Never exceed the limit values indicated on the scale for each measurement range.2. Do not touch the non-insulated probe parts when measuring.3. Never use the instrument to measure a voltage higher than 600 V AC / DC.4. When the value of the measured parameter is unknown, the instrument is set to the maximum range.5. Before selecting another measurement parameter, remove the probes from the previous measurement.6. When measuring impulse power supply, be aware that high impulse values can damage the unit.7. The safe touch voltage is up to 60 VDC, 30 VAC rms.8. Never measure impedance in a circuit with a supply voltage included. In the resistance measurement mode, do not measure the voltage. In the current measurement mode, do not measure the voltage.