EN
EN
BG
Current clamp meter M266C by Mastech® allows quick and easy non-contact measurement for DC/AC voltage, AC current, resistance and temperature. Jaw Opening Ф50mm/2.0". Overrange indication. Data hold function. Low battery indication and low battery display.
For measuring VAC, VDC, AC current, resistance, continuity test, insulation test and temperature.
1. Never exceed the limit values indicated on the scale for each measurement range.2. Do not touch the non-insulated probe parts when measuring.3. Never use the instrument to measure a voltage higher than 600 V AC / DC.4. When the value of the measured parameter is unknown, the instrument is set to the maximum range.5. Before selecting another measurement parameter, remove the probes from the previous measurement.6. When measuring impulse power supply, be aware that high impulse values can damage the unit.7. The safe touch voltage is up to 60 VDC, 30 VAC rms.8. Never measure impedance in a circuit with a supply voltage included. In the resistance measurement mode, do not measure the voltage. In the current measurement mode, do not measure the voltage.
![Технически данни [EN]](https://vikiwat.com/userfiles/productimages/1370/files/m266c.jpg){kind=small}
by
,
12 Jul 2018
