Inverter A301-600-24, 24VDC-230VAC, 600W, modified sine wave
Inverter A301-600-24, 24VDC-230VAC, 600W, modified sine wave
Inverter voltage converter from 24 VDC to 230 VAC with modified sine wave and output power 600 W (1500 W peak). Can be used anywhere you have a 24V battery - trucks, buses, motorboats, RVs, campers, etc.
The inverter has high peak power. Its compact design, metal body and relatively low weight allow it to be used in a variety of environments. Built-in protections protect your devices from damage and a depleted battery protects against deep discharge of the battery used for power. That way you will always have enough charge to start the vehicle. The built-in fan always provides the optimum operating temperature, which guarantees its long service life.
Inverter
input voltage - 20 - 30 VDC;
maximum input current - 110 A;
output frequency - 50 Hz;
battery discharge indication at - 20 +/- 0.8 VDC;
low battery shutdown at - 19.5 +/- 0.8 VDC;
thermal protection - 60 +/- 5°C;
surge protection - yes, microcontroller;
rapid surge protection - yes, micro-regulator;
high voltage input protection - yes, microcontroller;
battery polarity reversing protection - yes, through a fuse;
cooling - automatic fan when the output power is 100 W or the operating temperature is 40°C;
fuse - 3x20 A.
More information
To properly select the power of the device, it is advisable to consult a specialist. The power must be adapted to the power of the consumers and the type of load:
The rated power of the device must be 20-30% higher than the power of the consumer at active load (heaters, electric ovens, furnaces, stoves, incandescent lamps, etc.). This is due to the high starting current of the loads. . When the load is switched on and in the case of repeated short-term modes, the load for a short period exceeds significantly the nominal parameters specified in the load specifications.
When used in conjunction with inductive load consumers, the power must be 3 to 5 times the load power consumed! (fluorescent and fluorescent lighting, motors, pumps, air conditioners, refrigerators and freezers, etc.).
When the device is used with capacity load consumers, the selected power should be 5 to 10 times the power consumption of the load! (pulse chargers, LED drivers, pulse power, etc.).
The inverter must not be switched on when starting (starting) the vehicle.
Failure to comply with these requirements may result in the device being overloaded and no longer functioning, and accordingly the warranty will not cover the damage.
Please read the operating instructions carefully before switching on and using the inverter.
Specifications
Technical parameters of Inverter A301-600-24, 24VDC-230VAC, 600W, modified sine wave
Brand:
MICROCONTROL
Input voltage:
24 [VDC]
Output voltage:
230 [VAC]
Output power:
600 [W]
Peak power:
1500 [W]
Sine-wave kind:
modified sine wave
Dimensions:
213x200x70 [mm]
Efficiency:
85~90 [%]
Model:
A301-600-24
Idle current:
0.35 [A]
Files
Technical documentation of Inverter A301-600-24, 24VDC-230VAC, 600W, modified sine wave