Temperature controller VTR-70C4, 220VAC, 0-400°C, TC type K, relay output

Temperature controller VTR-70C4, 220VAC, 0-400°C, TC type K, relay output - 2

Rating:

VTR-70C4 is an electronic measuring and maintaining temperature device used to automate manufacturing processes, maintenance and reporting of temperature in solids, liquids and gases.

Rate this product Add to wishlist

Manufacturer: VEMARK

Price: 59.90лв. VAT Incl.

Quantity	1+	3+
List Price	59.90лв. VAT Incl.	56.90лв. VAT Incl.

SKU: 17817

Weight: 0.350 Kgs

Quantity: 3

Application

Thermocontrollers are used to automate production processes for measuring and maintaining temperature in solids, liquids and gases. They are widely used in the mechanical, chemical and other industries requiring precise temperature control.

VTR-70C4 thermostat

supply voltage - 220 VAC;
operating frequency - 50 Hz;
temperature sensor - thermocouple type K (sold separately from the controller);
operating range from 0 ° C to 400 ° C.
type of output - relay;
load carrying capacity 10 A / 220 VAC at active load;
load carrying capacity 3 A / 220 VAC with inductive and / or strong capacitive load;
alarm output, if the setpoint exceeds 25 ° C - relay contact, NO;
load carrying capacity 10 A / 220 VAC at active load;
load carrying capacity 3 A / 220 VAC with inductive and / or strong capacitive load;
display - three (3) digit digital indication of the measured temperature;
setup mode - three BCD encoder for manual setting of the operating temperature;
accuracy in measurement and adjustment - +/- 1%;
operating environment temperature from -10 ° C to +55 ° C;
relative humidity of the working environment - 0 to 90% RH free of corrosive vapors;
front panel dimensions - 72 x 72 mm;
type of installation - panel;
mounting depth - 100 mm;
installation of connecting wires - screw terminals;
indication of operating status - green LED (LED);
alarm output indication (AH) - red LED (LED);
thermal fault indication (TCB) indication - option - red LED.

Additional information

regulation law - PD law for temperature regulation, hysteresis regulation in% of the set value;

the setting of the PD law is done by the RESET trimmer on the front panel.

The regulation of the PD law (hysteresis)

proportional zone (P) - 25% of the full range;
proportional Cycle (D) - 20s ± 10s.

Technical specifications and instructions (BG) PDF, 210.97 KB