Name: DIN rail power supply SDR-75-48, 48~55/48VDC, 1.6A, 76.8W, IP20, MEAN WELL
Brand: MEAN WELL
SKU: 110041
Price: 35.70 EUR
Availability: InStock

DIN rail power supply SDR-75-48 MEAN WELL - 1

Power supply 48~55/48VDC, 1.6A, 76.8W - 2

Power supply for mounting on DIN rail MEAN WELL (SDR-75-48) with output current 1.6 A, output voltage 48~55/48 VDC and wide input voltage range 88~264 VAC / 124~370 VDC. Surge, overload, overheat and short circuit protection. Degree of protection IP20.

Manufacturer:

MEAN WELL

Model:

SDR-75-48

Individual Warranty:

24 months

Company Waranty:

24 months

Weight:

0.550 Kgs

Buy on installment with tbi bank

for a total cart value over € 50

Availability

Available online

82 pcs.

On site in Vikiwat shop

the price on site may be different

out of stock

Quantity on request

order more than available

See quantities

-15%

online

€ 35.70

~~€ 42.00~~

The offer is valid from 03.11.2026 to 03.11.2026

Buy on installment with tbi bank

for a total cart value over € 50

SKU: 110041

Application

Power supplies are devices widely used as power source of electrical current and voltage in radio electronics, communication and measurement equipment, medical equipment, automatic control of manufacturing processes and in various other applications in the electronics field. They rectify and stabilise the voltage that supplies the load and also rectify and correct the current impulse. A big advantage of the power supplies is their compact size and high efficiency (90%).

More information

In order to choose a device with suitable power, it’s necessary that you consult a specialist. The power should be based on the consumers’ power and the load type.

the rated power has to be 20-30% higher than the consumer’s power if the load is active (heating elements, electric ovens, stoves, filament lamps, etc.) because of the loads’ high starting current. When the consumer is switched on and the power supply unit is used in short-term conditions, the load exceeds considerably its rated values;

when the power supply is used with consumers with inductive load, the power should be 3 to 5 times bigger than load power consumption (fluorescent lighting, electric motors, pumps, air conditioners, etc.);

when the device is used with consumers with capacitive load, the power has to be 5 to 10 times bigger than consumer’s load (impulse power supplies, LED drivers, etc.).

In case you don’t follow these advices, the device can be overloaded and damaged. Please, have in mind that the warranty doesn’t cover this damage.

DIN rail power supply SDR-75-48, 48~55/48VDC, 1.6A, 76.8W, IP20, MEAN WELL

Application

More information

Technical parameters of DIN rail power supply SDR-75-48, 48~55/48VDC, 1.6A, 76.8W, IP20, MEAN WELL

Technical documentation of DIN rail power supply SDR-75-48, 48~55/48VDC, 1.6A, 76.8W, IP20, MEAN WELL