For registered users – Free economy delivery with Speedy within Bulgaria for online orders over 100BGN VAT Incl.

BGN

Products

0700 45 445 Phone line *4545 Mobile

Cart is empty.

Emergency power supply UPS PowerWalker VI 850 SH, 230VAC, 480W, modified sine wave

Emergency power supply PowerWalker VI 850 SH - 1

Emergency power supply UPS PowerWalker VI 850 SH - 2

Emergency power supply UPS PowerWalker VI 850 SH 230V 480W modified sine wave - 4

PowerWalker VI 850 SH has power output of 480 W, compact size, voltage stabilizer, multiple protection and is ideal for both home and office.

Rate this product Add to wishlist

Price: 139.00лв. VAT Incl.

Weight: 5.516 Kgs

Quantity: 0

Notify me when the product is available

SKU: 100871

Emergency Power Supply (UPS)

type - linear interactive;
capacity - 850 VA / 480 W;
power factor - 0.56;
input frequency range - 60/50 Hz;
voltage regulation - +/- 10%;
frequency (battery mode) - ± 1Hz;
transfer time - 4-8 ms;
charger - 1.2 A;
protection - from dilution, deep discharge, recharging and overloading;
fan - no;
LED indicator;
battery type - 12 V / 9 Ah - 1 count;
charging time - 4 hours to recover up to 90% of its capacity;
software - WinPower;
USB port;
HID Support;
RJ-11 protection;
operating temperature - from 0°C to 40°C;
humidity - 0% - 90% RH.

More information

To properly select the power of the device, it is advisable to consult a specialist. The power must be based on the power of the consumers and the type of load:

The rated power of the device must be 20-30% higher than the power of the consumer at an active load (heaters, electric ovens, furnaces, stoves, incandescent lamps, etc.). This is due to the high starting load . When the load is switched on and during repeated short-time modes, the load over a short period significantly exceeds the nominal parameters indicated in the load characteristics.
When the device is used in conjunction with inductive load consumers, the power must be 3 to 5 times the power consumption of the load! (fluorescent and fluorescent lighting, electric motors, pumps, air conditioners, refrigerators and freezers, etc.).
When the device is used for capacitive load consumers, the selected power must be 5 to 10 times greater than the load power consumed! (pulse chargers, LED drivers, pulse power supplies, etc.).

If these instructions are not met, it is possible for the device to be overloaded and to stop functioning, and therefore the warranty will not cover the damage.

Input voltage:

170~280 [VAC]

Output power:

480 [W]

Sine-wave kind:

modified sine wave

Additional functions:

USB

Battery capacity:

9Ah

Dimensions:

290x100x143 [mm]

Efficiency:

95 [%]

Model:

PowerWalker VI 850 SH

Output voltage:

230 [VAC]

Datasheet PowerWalker VI 850 SH (EN) PDF, 390.52 KB