Free delivery with Speedy within Bulgaria to address or office over € 75 (up to 30 kg) • to APS over € 50 ^new

Products

Your cart is empty

Adapter, 12VDC, 4A, 48W, 220VAC, 5.5x2.5mm, stabilized, N18061

Name: Adapter, 12VDC, 4A, 48W, 220VAC, 5.5x2.5mm, stabilized, N18061
Brand: DeTech
SKU: 1373
Price: 15.64 EUR
Availability: InStock
Rating: 5.0000 (1 reviews)

Adapter, 12VDC, 4A, 48W, 220VAC, 5.5x2.5mm, stabilized, N18061
- 1

Pulse power adapter N18061, input voltage 220VAC, output voltage 12 VDC, maximum current 4 A and power 48W.

Manufacturer:

DeTech

Model:

N18061

Individual Warranty:

24 months

Company Waranty:

12 months

Weight:

0.220 Kgs

Buy on installment with tbi bank

for a total cart value over € 50

Availability

Available online

7 pcs.

On site in Vikiwat shop

the price on site may be different

9 pcs.

See quantities

-7%

online

€ 15.64 / 30.59 лв

~~€ 16.82~~

The offer is valid from 07.06.2026 to 07.06.2026

Buy on installment with tbi bank

for a total cart value over € 50

SKU: 1373

Description Specifications Reviews

Report an error

Description

Additional information

The power cord is included in the price.

To properly select the power of the device, it is advisable to consult a specialist. The power must be based on the power of the consumers and the type of load:

The nominal power of the device must be 20-30% higher than the load capacity of the consumer at an active load (heaters, electric ovens, furnaces, stoves, incandescent lamps, etc.). This is due to the high starting current of the loads. When the load is switched on and during repeated short-time modes, the load over a short period significantly exceeds the nominal parameters specified in the load characteristics.

When the device is used in conjunction with inductive load consumers, the power must be 3 to 5 times the power consumption of the load! (fluorescent lighting, electric motors, pumps, air conditioners, refrigerators and freezers, etc.).

When the device is used for consumers with a capacitive load, the selected power must be 5 to 10 times greater than the power consumption of the load! (pulse chargers, LED drivers, pulse power supplies, etc.).

If these instructions are not complied with, it is possible for the device to be overloaded and stop functioning, and the warranty will not cover the damage.

Specifications