EN
EN
BG
LED tube Braytron with 1200 mm lenght, 18 W power consumption, 1750 lm (lumens) light flow and warm white light. With double-sided connection to the electrical network. Very suitable replacement of old fluorescent tubes. Non-dimmable. Manufacturer warranty 2 years.
LED tubes are an environmentally-friendly, economical and effective solution for lighting or replacing conventional fluorescent tubes that consume much more electricity. Diode tube lights Braytron are made of quality materials with socket' size and shape that is similar to fluorescent tubes, thus facilitating their replacement and installation in existing lighting fixtures. 1200mm fluorescent tubes typically consume around 36 W to 40 W and by switching to LED technology you can save at least 50% of lighting costs. This is an important advantage for buildings that have high electricity costs and are looking for profitability.
All LED tubes Braytron from VIKIWAT have a 24-month warranty period and a nominal life of 25 000 h. They are used as main lighting in car parks, factories, garages, offices, hotels, workshops and warehouses. T8 LED tube with 18 W power and 1200 mm length can replace traditional luminescent tube with power up to 36 W.
LED tube lights do not contain any toxic materials such as mercury (Hg) or lead (Pb), which are dangerous to humans and nature. There is no flickering and heating is almost zero which decrease rhe risk of fire or accidents. They have an immediate lighting start with full power and are silent compared to fluorescent tubes. BA52-01280 is with double-ended connection to the electrical network and offers 97 lm / W or a total illumination of 1750 lm. Emitting light is soft, warm white which does not irritate the eyes and creates a cozy atmosphere. LED tubes do not emit UV radiation so it's safe for your skin and eyes and will not attract insects.
The LED tubes emit more heat than the fluorescent tubes (at the same electrical power), so the luminaire needed to allow them to cool down enough. Otherwise it is possible to overheat and cease to function.
Additional information
Before switching on the LED tube, please be noted that ballast and starter should be disconnected from the connection circuit!
