One-sided connection LED tube Braytron with lenght 600 mm, 9 W power consumption and cool white light. Ideal substitute for old type fluorescent tubes.
Quantity | 1+ | 25+ | 100+ |
Price | BGN 4.13 | BGN 3.92 | BGN 3.72 |
List Price |
LED tubes are an excellent option for replacing conventional fluorescent tubes in luminaires. They are extremely environmentally friendly and economical luminaires that do not contain any toxic metals such as mercury and lead that are accepted dangerous to nature and humans. By replacing old fluorescent tubes with LED technology you can reduce electricity consumption by 50% which will also significantly reduce electricity bills. This is very important advantage especially for industrial buildings where any types of cost saving solutions are important. LED tubes do not emit ultraviolet (UV) and thus not attracting annoying insects. All LED tubes Braytron from VIKIWAT have two years warranty period and long life with up to 30,000 hours.
9 W LED tubes with length of 600 mm find a wide application as a main lighting source in manufacturers buildings, supermarkets, hospitals and other industrial areas. Thanks to their standard sizes and shapes they are extremely suitable for easy replacement of old type fluorescent tubes. With powerfull luminous flux of 100 lm / W or 900 lm per one LED tube they are used successfully to replace fluorescent tubes with up to 18 W.
Operating voltage is 220 VAC and do not require any additional starters and ballasts. BA52-20683 is single-sided to electrical network and offers bright cool white lighting. Generally cool white light has a slightly blue shade and is preferred for illuminating industrial buildings, hospitals, parkings and production's areas. Single- sided connection does not complicate the installation or operation of LED tubes but it is important to consider it before installation. We recommend to hire a qualified technician.
The LED tubes emit more heat than the fluorescent tubes (at the same electrical power), so the luminaire needed to allow them to cool down enough. Otherwise it is possible to overheat and cease to function.
Additional information
Before starting on the LED tube, the ballast and the starter should be disconnected from the connection diagram!