Photo-electric sensor with plastic housing, cylindrical M18, diffusion type, PNP transition, with one normally open contact, working distance 0-0.3m. Electrical connection - male connector M12, 4 pins, solid state output type.
Designed to operate under normal operating conditions (normal fire hazard, non-aggressive media without gas or other material that could damage the enclosure and cable). Do not apply force to the housing or cable during installation. Do not use organic solvents to clean the optical part!
Optical sensor
model XUB4APANM12;
transition - PNP;
contact system - 1 NO;
species - diffuse;
supply voltage - 12-24 VDC;
power supply limit - 10-36 VDC;
maximum power consumption - 35 mA (no load);
maximum switching frequency - 500 Hz;
distance of action - 0 - 0.3 m;
type of output signal - solid state;
operating temperature - from -25 to +55 ° C;
degree of protection IP - IP65
vibration resistance - 10-55 Hz with amplitude +/- 1.5 mm;