Emergency power supply UPS 12VDC-220VAC 1000W real sine wave

Emergency power supply UPS, 12VDC-220VAC, 1000W, real sine wave - 2

Emergency power supply UPS, 12VDC-220VAC, 1000W, real sine wave - 3

Emergency power supply UPS, 12VDC-220VAC, 1000W, real sine wave - 4

Rating:

Emergency power supply WELL Comander 1000W with true sine wave, voltage transformation from 12 VDC to 220 VAC and maximum 1000 W output power. The inverter has battery charging and voltage stabilizer functions.

Rate this product Add to wishlist

Warranty: 12 months

Price: 469.00лв. VAT Incl.

SKU: 93731

Weight: 15.000 Kgs

Quantity: 2

Application

this product is typically used for heating systems, circulation pumps, gas boilers, solar system converters and more.

the inverter has battery charging functions as well as a voltage stabilizer. Frequently called a UPS for fireplaces, this device, when disconnected from the mains supply, produces a voltage that ensures the normal operation of the local heating or other power-sensitive appliance. In addition, the UPS automatically recharges the battery when there is a mains supply, and after full charging it enters reserve mode until the next power supply stops.

please read the User's Guide before switching on and operating the inverter!

Inverter with WELL Comander 1000W 12VDC-220VAC, 1000W with true sine wave

model - WELL Comander 1000W;

input voltage from the battery - 12 VDC;

input voltage from the mains - 150-280VAC (150-228VAC for 220VAC, 156-294VAC for 230VAC, 163-307VAC for 240VAC);

input frequency - 50 Hz;

output form of voltage - true sine wave;

output voltage - 220/230/240 VAC ± 5%;

output frequency - 50 Hz ± 1 Hz;

output power - 1000 W (including inductive loads);

switching time (AC to DC) - ≤ 10 ms;

output protection - overload, short circuit, overvoltage, battery recharge, overheating, over-discharge battery;

fuse - at the inlet and outlet;

battery type - 12 VDC, lead-acid;

battery capacity - 20 - 70 Ah (not included in the price);

battery protection - back-up (buzzer);

operating temperature - 0 - 40 ° C;

humidity of the medium - 0 - 93%;

altitude - <1000 m;

noise level - <50 dB;

CPC - max 95% (max 80% in inverter mode)

LCD screen with indications (battery status, battery condition in%, input and output voltage);

degree of protection - IP20

connection to battery - red (+) and black (-) cables for (+) and (-) the battery;

dimensions - 293 × 280 × 160 mm (on the case 370 × 355 × 235 mm).

Attention!

To properly select the power of the device, it is advisable to consult a specialist. The power must be based on the power of the consumers and the type of load:

The nominal power of the device must be 20-30% higher than the load capacity of the consumer at an active load (heaters, electric ovens, furnaces, stoves, incandescent lamps, etc.). This is due to the high starting current of the loads. When the load is switched on and during repeated short-time modes, the load over a short period significantly exceeds the nominal parameters specified in the load characteristics.

When the device is used in conjunction with inductive load consumers, the power must be 3 to 5 times the power consumption of the load! (fluorescent lighting, electric motors, pumps, air conditioners, refrigerators and freezers, etc.).

When the device is used for consumers with a capacitive load, the selected power must be 5 to 10 times greater than the power consumption of the load! (pulse chargers, LED drivers, pulse power supplies, etc.).

If these instructions are not complied with, it is possible for the device to be overloaded and stop functioning, and the warranty will not cover the damage.

Emergency power supply UPS, 12VDC-220VAC, 1000W, real sine wave

Application

Inverter with WELL Comander 1000W 12VDC-220VAC, 1000W with true sine wave