Name: Adapter, 5VDC, 2A, 10W, 100-240VAC, 5.5х2.5mm, stabilized, UP010S
Brand: DeTech
SKU: 2658
Price: 8.81 EUR
Availability: InStock

Power adapter with input voltage from 100 to 240 VAC, output voltage 5 VDC, maximum current 2 A, connector 5.5x2.5 mm. Socket polarity - plus inside, minus outside.

Manufacturer:

DeTech

Model:

UP010S

Individual Warranty:

24 months

Company Waranty:

12 months

Weight:

0.110 Kgs

Buy on installment with tbi bank

for a total cart value over € 50

Availability

Available online

16 pcs.

On site in Vikiwat shop

the price on site may be different

2 pcs.

See quantities

-11%

online

€ 8.81

~~€ 9.90~~

The offer is valid from 03.11.2026 to 03.11.2026

Buy on installment with tbi bank

for a total cart value over € 50

SKU: 2658

Features

Due to the wide range of input voltage, the adapter is applicable in both the EU and the USA. Observe the polarity, "+" is inside the connector.

Attention!

To properly select the power of the device, it is advisable to consult a specialist. The power must be based on the power of the consumers and the type of load:

The nominal power of the device must be 20-30% higher than the load capacity of the consumer at an active load (heaters, electric ovens, furnaces, stoves, incandescent lamps, etc.). This is due to the high starting current of the loads. When the load is switched on and during repeated short-time modes, the load over a short period significantly exceeds the nominal parameters specified in the load characteristics.

When the device is used in conjunction with inductive load consumers, the power must be 3 to 5 times the power consumption of the load! (fluorescent lighting, electric motors, pumps, air conditioners, refrigerators and freezers, etc.).

When the device is used for consumers with a capacitive load, the selected power must be 5 to 10 times greater than the power consumption of the load! (pulse chargers, LED drivers, pulse power supplies, etc.).

If these instructions are not complied with, it is possible for the device to be overloaded and stop functioning, and the warranty will not cover the damage.

Adapter, 5VDC, 2A, 10W, 100-240VAC, 5.5х2.5mm, stabilized, UP010S

Features

Technical parameters of Adapter, 5VDC, 2A, 10W, 100-240VAC, 5.5х2.5mm, stabilized, UP010S