Name: Adapter, 12VDC, 8A, 96W, 100~240VAC, 5.5x2.5mm, impulse, LY-J1208
SKU: 157816
Price: 19.93 EUR
Availability: InStock

Adapter, 12VDC, 8A, 96W, 100~240VAC, 5.5x2.5mm, impulse, LY-J1208
- 1

Адаптер, 12VDC, 8A, 96W, 100~240VAC, 5.5x2.5mm, импулсен, LY-J1208
- 2

Adapter with output voltage 12 V, input voltage 100~240 V, with terminals 5.5x2.5mm, pulse type, overall dimensions 137x64x34 mm, model LY-J1208. Socket polarity - plus inside, minus outside.

Model:

LY-J1208

Individual Warranty:

24 months

Company Waranty:

12 months

Weight:

0.387 Kgs

Buy on installment with tbi bank

for a total cart value over € 50

Availability

Available online

7 pcs.

On site in Vikiwat shop

the price on site may be different

5 pcs.

See quantities

-9%

online

€ 19.93

~~€ 21.90~~

The offer is valid from 01.09.2026 to 01.09.2026

Buy on installment with tbi bank

for a total cart value over € 50

SKU: 157816

Universal adapter

To correctly select the power of the device, it is recommended to consult a specialist. The power must be consistent with the power of the consumers and the type of load:

The nominal power of the device must be 20-30% higher than the power of the consumer with active load (heaters, electric ovens, furnaces, stoves, incandescent lamps, etc.). This is necessary due to the high starting current of the loads. When the load is switched on and in repeated short-term modes, the load for a short period significantly exceeds the nominal parameters specified in the technical characteristics of the load.

When the device is used in combination with consumers with inductive load, the power must be 3 to 5 times greater than the power consumed by the load! (luminescent and fluorescent lighting, electric motors, pumps, air conditioners, refrigerators and freezers, etc.).

When the device is used with consumers with capacitive load, the selected power must be 5 to 10 times greater than the power consumed by the load! (switching chargers, LED drivers, switching power supplies, etc.).

If these instructions are not followed, the device may be overloaded and stop functioning, and accordingly the warranty will not cover the damage.

Adapter, 12VDC, 8A, 96W, 100~240VAC, 5.5x2.5mm, impulse, LY-J1208

Universal adapter

Technical parameters of Adapter, 12VDC, 8A, 96W, 100~240VAC, 5.5x2.5mm, impulse, LY-J1208