EN
EN
BG
LED tube light Braytron® with double-sided connection, power consumption 18 W, lenght 1200 mm, luminous flux 1800 lm and natural white lighting (daylight) 4000 K. Ideal lighting solution for industrial buildings, warehouse area, stores, construction sites, hospitals. For indoor use only IP20. Manufacturer warranty 24...
LED tubes are an environmentally-friendly, economical and effective solution for lighting or replacing conventional fluorescent tubes that consume much more electricity. Diode tube lights Braytron are produced with quality materials and can work up to 25 000 h. All LED tubes purchased from VIKIWAT comes with two years warranty period. LED tube lights do not contain any toxic materials such as mercury which is dangerous to humans and nature. There is no flickering during lighting and there is no heating which help to eliminate rhe risk of fire or accidents.
LED tubes are with same socket' size and linear shape that is similar to traditional fluorescent tubes which ease their replacement. Generally one 1200 mm long fluorescent tubes consume around 36 W andchanging it new LED technology options, business and home owner can save at least 50% of electricity consumption. They are often used as a general lighting source in car parks, factories, garages, offices, hotels, workshops and warehouses. T8 standard LED tube lights with 18 W can replace traditional fluorescent lamps with power up to 36 W.
Another advantage of LED tubes is their immediate start compared to fluorescent tubes which need time to warm up. BA52-01281 is with double-ended connection to the electrical network and offers 100 lm / W or a total illumination of 1800 lm for one diode tube. The emitting light is neutral white which is close to daylight and does not irritate the eyes. Neutral lighting is suitable for all type of working and home areas. LED tubes do not emit UV radiation so this technology is very safe for your skin and eyes and will not attract insects.
The LED tubes emit more heat than the fluorescent tubes (at the same electrical power), so the luminaire needed to allow them to cool down enough. Otherwise it is possible to overheat and cease to function.
Before switching on the LED tube, please be noted that ballast and starter should be disconnected from the connection circuit!
by
,
07 Apr 2017
by
,
11 Apr 2016
by
,
27 Dec 2015
