Name: Switching power supply for DIN bus, CP-E-24/2.5, 24VDC, 2,5A, 60W, ABB
Brand: ABB
SKU: 156949
Price: 141.67 EUR
Availability: InStock

Switching power supply for DIN bus, CP-E-24/2.5, 24VDC, 2,5A, 60W, ABB

Switching power supply for DIN rail mounting, model 1SVR427032R0000 from ABB. One DC output 2.5 A, output voltage 24 VDC, wide input voltage range 85 ~ 264 VAC.

Manufacturer:

ABB

Model:

1SVR427032R0000

Individual Warranty:

24 months

Company Waranty:

12 months

Weight:

0.430 Kgs

Buy on installment with tbi bank

installment options

possible Free shipping

Availability

Delivery within 10 days

8 pcs.

On site in Vikiwat shop

the price on site may be different

out of stock

Quantity on request

order more than available

See quantities

€ 141.67 / 277.08 лв

Buy on installment with tbi bank

installment options

SKU: 156949

Application

Switching power supplies are widely used as power sources of electric current and voltage in radioelectronics, communication and computing, medical equipment, automatic control of production processes, as well as in other areas of electronics. They straighten and stabilize the voltage with which an electric power supply is powered. device, while simultaneously straightening and correcting the current pulse. A great advantage of switching power supplies is their compact size, as well as the high efficiency – over 90%. The power supply can be mounted on the DIN rail in the power distribution board of the building.

Further information

To correctly select the power of the device, it is advisable to consult a specialist. The power must be appropriate to the power of the consumers and the type of load:

The rated power of the device should be 20-30% higher than the power of the consumer at active load (heaters, electric ovens, furnaces, stoves, incandescent lamps, etc.) This is due to the high inrush current of the loads. When the load is switched on and in repeated short-term modes, the load for a short period significantly exceeds the nominal parameters specified in the technical characteristics of the load.

When the device is used in combination with consumers with an inductive load, the power must be 3 to 5 times greater than the power consumption of the load! (fluorescent and fluorescent lighting, electric motors, pumps, air conditioners, refrigerators and freezers, etc.).

When the device is used for consumers with a capacitive load, the selected power must be 5 to 10 times greater than the power consumption of the load! (pulse chargers, LED drivers, switching power supplies, etc.).

In the event that these requirements are not met, the device may be overloaded and cease to function, and the warranty will not cover the damage.

Switching power supply for DIN bus, CP-E-24/2.5, 24VDC, 2,5A, 60W, ABB

Application

Further information

Technical parameters of Switching power supply for DIN bus, CP-E-24/2.5, 24VDC, 2,5A, 60W, ABB