





Single-ended LED tube light by Braytron with length 600 mm, power consumtion 9 W, luminous flux 900 lm and natural white lighting (daylight). Ideal substitute for old type fluorescent lamps 18 W. Manufacturer warranty 2 years.
The offer is valid from 06.03.2025 to 06.04.2025
LED tubes are by nature a diode lighting sources and can be used for basic lighting in retail outlets, workshops, manufacturing buildings, hospitals, car parks, hotels, supermarkets, halls and more. Because of their standard size and shape, they are used as a replacement for obsolete T5 and T8 fluorescent tubes and can be installed in almost any type of luminaire that works with luminescent cigars, and it is important to know that for use old bodies require bodywork, for which we recommend a qualified technician.
LED tube lights 9 W directly replace fluorescent lamps with power up to 18 W. They are powered by a direct voltage of 220 VAC and do not need additional devices such as starters, ballasts or power supplies. BA52-00680 has two-sided power supply, offers a 900lm (lumen) light output and a soft, warm white light that is cozy and recommended for people with sensitive eyes.
LED tubes are much more economical and efficient in terms of electricity consumption and can reduce electricity consumption by as much as 50%. They also do not contain hazardous toxic materials such as mercury and lead as luminescent tubes, which are dangerous not only for humans but also for the environment. They have an immediate start of flashing without blinking and a time of hindrance that does not irritate the eyes and is silent. They feature a long life of up to 30000 h, low maintenance costs and work reliability. All Braytron LED tubes from VIKVAT come to you with a 24-month warranty.
LED tube lighting emit more heat compared to traditional fluorescent tubes (with same electrical power), so the luminaire fixture need to allow them to cool down enough. Overheating can damage the products and its functions.
Before switching on the LED tube, please be noted that ballast and starter should be disconnected from the connection circuit!