Name: Linear transmitter-receiver (transceiver) SN75176B, 5VDC
Brand: TEXAS INSTRUMENTS
SKU: 96713
Price: 2.06 EUR
Availability: InStock

Linear transmitter-receiver (transceiver) SN65176B, 5VDC

Linear differential bus transceiver SN75176B, supply voltage 5 VDC, data transmission speed ≤10 Mbps

Manufacturer:

TEXAS INSTRUMENTS

Weight:

0.011 Kgs

Buy on installment with tbi bank

for a total cart value over € 50

Availability

Available online

17 pcs.

On site in Vikiwat shop

the price on site may be different

out of stock

See quantities

-11%

online

€ 2.06 / 4.03 лв

~~€ 2.31~~

The offer is valid from 11.04.2026 to 11.04.2026

Buy on installment with tbi bank

for a total cart value over € 50

SKU: 96713

Application

The SN75176B differential bus transceiver is integrated circuit designed for bidirectional data communication on multipoint bus transmission lines. It is designed for balanced transmission lines and meet ANSI Standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27. The SN75176B device combine a 3-state differential line driver and a differential input line receiver, both of which operate from a single (monopolar) 5-V power supply. The driver and receiver have active-high and active-low enables, respectively, that can be connected together externally to function as a direction control. The driver differential outputs and the receiver differential inputs are connected internally to form differential input/output (I/O) bus ports that are designed to offer minimum loading to the bus when the driver is disabled or the supply voltage is absent (VCC) = 0. These ports feature wide positive and negative common- mode voltage ranges, making the device suitable for party-line applications. The driver is designed for up to 60 mA of sink or source current. The driver features positive and negative current limiting and thermal shutdown for protection from line-fault conditions. Thermal shutdown is designed to occur at a junction temperature of approximately 150°C. The receiver features a minimum input impedance of 12 kΩ, an input sensitivity of ±200 mV, and a typical input hysteresis of 50 mV. The SN75176B device can be used in transmission-line applications employing the SN75172 and SN75174 quadruple differential line drivers and SN75173 and SN75175 quadruple differential line receivers

Linear differential bus transceiver

type - linear transceiver;

denomination - SN75176B;

supply voltage - 5 VDC (7 VDC max);

voltage range at any bus terminal - –10 VDC-15 VDC;

enable input voltage - 5.5 VDC max;

log. 1 level (high; leads D, DE and RE inverted) input voltage - 5 VDC (2 VDC min);

log. 0 level (low; leads D, DE and RE inverted) input voltage - 0 VDC (0.8 VDC max);

log. 1 (high) level output current - -driver: –60 mA -receiver: –400 uA=–0.4 mA;

log. 0 (low) level output current - -driver: 60 mA -receiver: 8 mA;

receiver high impedance state output current (output voltage 0.4 V - 2.4 V) - ± 20 uA=± 0.020 mA;

total current consumption (no load) - -driver: 42 mA - 70 mA, outputs enabled; 26 mA - 35 mA, outputs disabled; -receiver: 42 mA - 55 mA, outputs enabled; 26 mA - 35 mA, outputs disabled;

receiver input resistance - 12 kOhm;

interfaces - RS-422, RS-485;

data transmission speed on bus RS-485 - ≤ 10 Mb/s (Mbps; 1 Mb=2^20 b=1048576 b);

operating ambient temperature range - –40 ºC - 105 ºC;

storage ambient temperature range - –65 ºC - 105 ºC;

thermal resistance - 97 K/W (ºC/W);

dimensions - 9.81 mm X 6.35 mm;

case - DIP8;

mounting - THT.

Linear transmitter-receiver (transceiver) SN75176B, 5VDC

Application

Linear differential bus transceiver

Technical documentation of Linear transmitter-receiver (transceiver) SN75176B, 5VDC